If the LED of the antenna on your Navimow H1 mower is not lighting up, follow these troubleshooting steps:
1. Check the Antenna Connection:
Ensure that the antenna is securely connected to the charging station. A loose connection can prevent the LED from lighting up.
2. Verify the Antenna Placement:
Confirm that the antenna is installed in a suitable location. For optimal signal reception, it is best to install the antenna in a high position, such as on the roof.
3. Relocate the Antenna:
If the antenna is not in an optimal position, relocate it to a higher location, like the roof, to improve signal strength and ensure proper functioning.
4. Contact the Seller:
If the connection and placement are correct and the LED still does not light up, please contact the seller directly for inspection and repair.
1. Check the Antenna Connection:
Ensure that the antenna is securely connected to the charging station. A loose connection can prevent the LED from lighting up.
2. Verify the Antenna Placement:
Confirm that the antenna is installed in a suitable location. For optimal signal reception, it is best to install the antenna in a high position, such as on the roof.
3. Relocate the Antenna:
If the antenna is not in an optimal position, relocate it to a higher location, like the roof, to improve signal strength and ensure proper functioning.
4. Contact the Seller:
If the connection and placement are correct and the LED still does not light up, please contact the seller directly for inspection and repair.