Segway Navimow Admin

If your Navimow X4 is mowing the same area repeatedly, follow these steps:1. Check Mowing Cycle SettingsOpen the Navimow App and check if the “mowing cycle” function is enabled.If it is activated, ...

If your Navimow X4 slips while mowing on slopes, follow these steps:1. Check Slope ConditionsThe Navimow X4 can safely operate on slopes up to 84% (40°).On wet slopes, slipping can occur and is con...

If the Navimow App indicates that the Primary Antenna or the charging station has been moved, please follow the steps below:Ensure your firmware is up to date.Relocate the charging station in the A...

If some areas within the mowing zone are being missed by your Navimow X4, follow these steps:1. Inspect the Missed AreaCheck if the missed area is near non-grass surfaces, narrow passages, or obsta...

If your Navimow X4 stops while returning to the charging station, follow these steps:1. Check the Firmware VersionEnsure that your Navimow X4 is running the latest firmware. Outdated firmware can c...

If your Navimow X4 stops while mowing, follow these steps based on the situation:1. Stops due to low batteryIf the battery power is depleted and the machine is unable to return to the base station,...

Here’s what to do if your Navimow X4’s mowing path appears abnormal:1. Check for ObstaclesInspect your lawn for any non-grass objects or bare patches.These areas may trigger the VisionFence (VF), c...

If your Navimow X4’s mowing area per hour is below expectations, here’s what to check:1. Satellite Signal QualityWeak signal causes the mower to pause frequently to regain positioning, significantl...

Here’s what to do if your Navimow X4’s mowing direction seems abnormal:1. Check Mowing TasksThe Navimow X4 changes its cutting angle (pattern) only after completing 100% of the current mowing task....

If your mower failed to detect an obstacle, please follow the steps below:Understand which obstacles may not be recognizedThe VisionFence system may not detect obstacles that are:Too small (less th...