(Navimow X4) What should I do if the some of the area missed out?

If some areas within the mowing zone are being missed by your Navimow X4, follow these steps:

1. Inspect the Missed Area

Check if the missed area is near non-grass surfaces, narrow passages, or obstacles. These can prevent the mower from reaching the area.

2. Non-Grass Areas

Set a VisionFence-Off zone for non-grass areas so the mower avoids them.

3. Narrow Passages

Not adjacent to walls/obstacles: Split the area into two separate zones or create a blind zone to help the mower navigate.

Adjacent to walls: Adjust the area shape, widen the passage, or create a separate zone.

4. Obstacles in the Passage

Remove obstructions or enable the channel sense feature to allow smoother navigation.

5. Check GPS Signal

If the area is between buildings, near walls, or other obstructions, the GPS signal may be blocked, affecting coverage.

6. If the Issue Persists

• Provide the following information to [e-mail](for EU users) and [e-mail] (for US users) for further assistance.
• Time when the problem occurred.
• Photos of the missed area and surroundings.
• Serial Number (SN) of your Navimow X4.
• Ensure the Navimow X4 is connected to the mains and placed on the charging station.