(Navimow i1) What should I do if the Navimow i1 goes beyond the boundary?

Check the firmware: Make sure that the firmware of your Navimow App is up to date.

Boundary type: Check that you have set a standard boundary or a ride-on boundary when mapping.

Ride-on boundary: It's normal for the mower to slightly cross the boundary. This gives a better cut near the edges.

Standard boundary: Check that there is a slope near the boundary and that the GPS signal is strong.

Base station and antenna placement: If the charging station and antenna are not optimally placed, try moving the charging station to a more open area and mounting the antenna on the roof.

If adjusting the position of the cradle and antenna doesn't solve the problem, please contact us at [e-mail].