If the Navimow H1 is used regularly, it is recommended to replace the blades and screws every 1–2 months to ensure safety and better mowing results. Wear heavy gloves when you check or service the blade. Follow the steps below:
1. Turn off the Navimow H1.
2. To avoid scratching, place the Navimow H1 on a soft and clean surface in an upside-down position.
3. Use a cross-tip screwdriver to loosen the three screws.
4. Remove the screws and blades.
5. Fasten the new blades and screws. Make sure the blades can pivot freely.
You can also view machine maintenance and upkeep content from the App.
1. Turn off the Navimow H1.
2. To avoid scratching, place the Navimow H1 on a soft and clean surface in an upside-down position.
3. Use a cross-tip screwdriver to loosen the three screws.
4. Remove the screws and blades.
5. Fasten the new blades and screws. Make sure the blades can pivot freely.
You can also view machine maintenance and upkeep content from the App.