1. Install the GNSS antenna back to the standing pole or the Antenna Extension Kit
2 . Find the former fixing position of the charging station, place the charging station by aligning the charging board with the original holes, and connect the power cable.
Note: It is essential to mark the original fixing holes so that the charging station can be properly placed in its original position in the coming year.
3. Place the Navimow H1 outside the charging station and press the OK button to start the Navimow H1.
When the Navimow H1 light turns blue, press the HOME button and then press the OK button. The Navimow H1 will go to the charging station and charge itself.
4. If the Navimow H1 can go to the charging station and charge itself properly, press the MOW button to start a mowing task. If the Navimow H1 can leave the charging station and start mowing properly, and no error appears on the app, the Navimow H1 can operate normally. Now you can fix the charging station.
5. We have released new firmware versions during the winter storage period which contain new features and fixes for known issues. We recommend that you upgrade your device to the latest firmware version for the best user experience before the Navimow H1 is officially put into service.
To successfully complete the update, please ensure that:
1. The Navimow H1 is in the charging station.
2. The Navimow H1 is connected to a network with a strong signal (through 4G or Wi-Fi).
3. The battery power is more than 20%.
4. No mowing schedule in the next hour.