If your Navimow H1 is having trouble recognizing the VisionFence, follow these steps:
1. Check Connection:
Ensure that the VisionFence (VF) and the mower’s connection cables are securely and properly installed.
2. Restart the Mower:
If the connections are correct, try restarting the mower via the following steps:
---Remove the mower from the charging station.
---Press and hold the OK button for 4 seconds to turn off the mower.
---Press the OK button briefly to turn the mower back on.
3. Contact the Seller:
If restarting the mower does not resolve the issue, please contact the seller for inspection and repair.
1. Check Connection:
Ensure that the VisionFence (VF) and the mower’s connection cables are securely and properly installed.
2. Restart the Mower:
If the connections are correct, try restarting the mower via the following steps:
---Remove the mower from the charging station.
---Press and hold the OK button for 4 seconds to turn off the mower.
---Press the OK button briefly to turn the mower back on.
3. Contact the Seller:
If restarting the mower does not resolve the issue, please contact the seller for inspection and repair.
Comments
0 comments
Article is closed for comments.