(Navimow X3) How to replace the blades? – segway navimow

If the Navimow X3 is used regularly, it is recommended to replace the blades and screws every 80 working hours to ensure safety and better mowing results. Wear heavy-duty gloves when you check or service the blade. Follow the steps below:

1. Turn off the Navimow X3.

2. To avoid scratching, place the Navimow X3 on a soft and clean surface in an upside-down position.

3. Use a cross-tip/Philips head screwdriver to loosen the 6 screws.

4. Remove the screws and blades.

5. Fasten the new blades and screws. Make sure the blades can pivot freely.

For more details, please refer to the following link:

https://www.youtube.com/watch?v=cAb69IVNwIo&list=PLIH_f4yOamF5aEbTgwl6TP9rfsNWVh1RN&index=23