| 1. Install the GNSS antenna back to the standing pole or the Antenna Mounting Kit 2. Find the former fixing position of the charging station, place the charging station by aligning the charging board with the original holes, and connect the power cable. Note: It is essential to mark the original fixing holes so that the charging station can be properly placed in its original position in the coming year. 3. Place the Navimow X3 outside the charging station and press the OK button to start the Navimow X3. When the Navimow X3 light turns blue, press the HOME button and then press the OK button. The Navimow X3 will go to the charging station and charge itself. 4. If the Navimow X3 can go to the charging station and charge itself properly, press the MOW and then OK button to start a mowing task. If the Navimow X3 can leave the charging station and start mowing properly, and no error appears on the app, the Navimow X3 can operate normally. Now you can fix the charging station. 5. We have released new firmware versions during the winter storage period which contain new features and fixes for known issues. We recommend that you upgrade your Navimow X3 to the latest firmware version for the best user experience before the Navimow X3 is officially put into service. To successfully complete the update, please ensure that: 1. The Navimow X3 is in the charging station. 2. The Navimow X3 is connected to a network with a strong signal (through 4G or WiFi). 3. The battery power is more than 20%. 4. No mowing schedule in the next hour. |