Segway Navimow Admin

The error code 4204 indicates antenna communication error. Please make sure the antenna is plugged in and there are no obstructions between the antenna and the Navimow X3. If the antenna is alrea...

Error code 6101 indicates a map loading error. Please press the STOP button on the Navimow X3 to clear the error code and resume the task. If the error persists, please delete the current map and ...

The error code 9109 indicates program crash. Please press the STOP button on the Navimow X3 to clear the error code, and resume the task. If it fails, restart the Navimow X3 and and then put it i...

Error code 6105 indicates a out of boundary error. Please place the Navimow X3 on an open and flat surface within the boundary or push the Navimow X3 into the charging station. Press the STOP butt...

Error code 2105 indicates that the battery in the Navimow X3 is experiencing high temperatures. To resolve the issue, kindly move the Navimow X3 to a shady spot with an operating temperature of 0...

Error code 1212 indicates that Navimow Trimmer overcurrent protection. Please press the STOP button on the Navimow X3 to clear the error code. If the error persists, please send us an email at n...

Error code 6103 indicates a position acquisition error. Please push the Navimow X3 into the charging station, then press the STOP button on the Navimow X3 and resume the task. If the error persis...

The antenna displays a pulsating light effect when it is unable to communicate with the Navimow X3. This may happen due to the following reasons: 1. The Navimow X3 is turned off. Ensure that the N...

If you notice no GPS signal in the Satellite Analyzer, please follow these steps: Check the Cable: Verify that the cable between the Primary Antenna and charging station is securely connected. If ...

If the app displays a message about the antenna flashing, it indicates that the primary and the signal enhancement antennas have not synchronized successfully.       Solution: Wait until the mowin...