If the Navimow X4 is used regularly, it is recommended to replace the blades and screws every 80 working hours to ensure safety and better mowing results. Wear heavy-duty gloves when you check or service the blade. Follow the steps below:
1. Turn off the Navimow X4.
2. To avoid scratching, place the Navimow X4 on a soft and clean surface in an upside-down position.
3. Prepare a cross-tip/Philips head screwdriver.
4. Remove the blade discs, then remove the upper cover of the blade discs.
Replace the blades, reinstall the upper cover of the blade discs, and finally mount the blade discs back in place.
1. Turn off the Navimow X4.
2. To avoid scratching, place the Navimow X4 on a soft and clean surface in an upside-down position.
3. Prepare a cross-tip/Philips head screwdriver.
4. Remove the blade discs, then remove the upper cover of the blade discs.
Replace the blades, reinstall the upper cover of the blade discs, and finally mount the blade discs back in place.
Comments
0 comments
Article is closed for comments.