1. Reinstall the charging station
Locate the original fixing position of the charging station.
Place the charging station so that the charging board aligns with the original holes and reconnect the power cable.
Note: Marking the original fixing holes is essential to ensure the charging station can be placed correctly in future years.
If you cannot return the charging station to its original position, use the Relocate Charging Station feature in the Navimow app to update its location.
2. Start the Navimow i2 AWD
Place the Navimow i2 AWD outside the charging station and press the OK button to turn it on.
When the Navimow i2 AWD light turns blue, press the HOME button, then press OK. The mower will return to the charging station and begin charging automatically.
3. Check functionality
If the Navimow i2 AWD successfully returns to the charging station and charges, press the MOW button to start a mowing task.
If it can leave the charging station, start mowing properly, and no errors appear in the app, the Navimow i2 AWD is operating normally. You can now secure the charging station in place.
4. Firmware update
During winter storage, new firmware versions may have been released containing new features and fixes. It is recommended to update the Navimow i2 AWD to the latest firmware before regular use.
To ensure a successful update:
-Place the Navimow i2 AWD in the charging station.
-Connect to a network with a strong signal (via 4G or WiFi).
-Ensure the battery level is above 20%.
-Make sure no mowing schedule is set in the next hour.