Step 1: Connect to the power supply and charge the mower
NOTE: A new mower may have a low battery after a long-time storage. Fully charge the mower before the first use.
1. Place the mower in the charging station. Make sure the charging strip on the mower and the contact strip on the charging station are in good contact.
2. Connect to the power supply cable, and use the extension cable if needed.
3. Plug into the power outlet.
Step 2: Power on and activate the mower
Press OK and hold for 1 second to power on the mower.
Enable Bluetooth on your phone, log in to the APP, and follow the instructions to pair with the mower. To begin with, tap 'Add device', and then select 'Navimow i2 Series'.
Connect the mower to a 4G or Wi-Fi network.
Step 3: Find Locations
Do:
To ensure proper operation and smooth docking, make sure the area in front of the charging base remains clear for at least 2 meters, with a minimum of 0.5 meters of unobstructed space on both the left and right sides.
Don't:
1. Do not install the charging station on a slope. Place the charging station on a flat non-hardened ground.
2. Stay away from sprinkler heads, fountains or other outdoor water systems.
3. Stay away from substations, generators, water pump stations and air conditioners.
Step 4: Upgrade to the latest firmware
We regularly release firmware updates to improve your mowing experience.
To receive updates automatically, keep the mower on its charging station and ensure it is connected to Wi-Fi. When a new firmware version is available, it will download and install automatically.
You can check the current firmware version in the app:
Home>Settings>Device Management>Firmware Version.
When “OTA” appears on the mower’s screen and the ambient light flashes white, the mower is updating its firmware.
Please do not power off or operate the mower during this process. The update usually takes about 10–15 minutes.
Once the ambient light turns green, the update is complete and the mower is ready for use.
To perform the firmware upgrade, make sure the following conditions are met:
---The mower is on the charging station.
---The mower is connected to a network with a strong signal (4G or Wi-Fi).
---The battery power is more than 20%.
---There is no mowing schedule in the next hour.
Comments
0 comments
Article is closed for comments.