(Navimow H1) V1.5.0 Firmware & App Release Note (updated 2023.10)

*Note: Some features mentioned below will be available once the firmware and the app are BOTH updated to the following versions:
 
App:
Navimow app: V1.5.0
 
Firmware:
ECU firmware: 2.0.4.6
Bluetooth firmware: 0.0.2.6
Hub motor firmware: 0.0.5.3
Blade motor firmware: 0.0.5.2
Charging station firmware: 0.0.2.D
Bump sensor firmware: 0.0.3.2
Telematics BOX firmware: 0.0.7.8 (Wi-Fi)/0.1.7.B (4G)
VisionFence Sensor firmware: 0.0.2.E
 
 
Reminder: The VisionFence requires a separate OTA update to 0.0.2.E for new features and bug fixes. Go to Settings-Mower-VisionFence Sensor-Network config, connect to a strong Wi-Fi, and wait 1 h. You can bring the mower alone indoors near the router for a better signal. For help, email us with your SN to [e-mail].
 
New features

• Multi-zone Management

You can watch the tutorial video here (If you want to select a language for the subtitles, watch it in the YouTube app or on PC and change the settings in 'Settings_Subtitles_Auto-translate'): https://www.youtube.com/watch?v=vlBf0bYZaBw
Note: The mowing progress will be reset to 0% after the OTA update.

1. You can create multiple zones for your map, each zone with its unique name and a customized cutting height.
2. For one-time mowing, you can select to mow all zones or only some of them.
3. For scheduled mowing, you can set up schedules for all or selected zones.

• Other

1. A new switch for the Mowing Cycle has been added. You can decide whether the mower will start another round of mowing if the mowing progress reaches 100% before the schedule ends.
2. Tap and hold the MOW button on the app to clear the mowing progress and start again.
3. A new switch for the Edge Mowing has been added. You can decide whether the mower will mow along the edges.
4. The BladeHalt sensor is automatically disabled when it has been triggered many times due to false detection.
5. You can easily check the 4G service status and its valid period and then renew the service if needed.
6. Updates on the mower display screen: Displays 'IDLE' when the mower has no ongoing tasks (mowing, mapping, OTA update, unlocking the mower, error code display...); displays a two-digit number indicating the progress in percentage during one-time mowing; and displays 'AUTO' during scheduled mowing.

• Fixes and improvements

1. Hungarian is supported in the app as a new language.
2. The problem of the mower mistakenly leaving large areas of lawn uncut is reduced.
3. The problem of the mower not moving in straight lines but making unexpected turns before steep slopes is reduced.
4. You can use the ‘Toolbox’ to reduce the communication interference that may be caused by a 4G connection. Go to Settings>MOWER>Device management>Toolbox>Interference reduction.