Error code 6006 means the bumper sensor is triggered constantly. The followings are the possible causes and corresponding troubleshooting guide. Please kindly check.
Possible cause
During the map testing/mowing/homing process, your mower hits an obstacle but fails to move back to avoid it as your mower gets stuck by obstacles behind or rough terrains. As a result, the bumper sensor is constantly triggered.
Troubleshooting guide
1. Remove the obstacle(s) in your mower's way. If the obstacle (s) can't be removed, please set up an off-limit island on this place.
2. Press the STOP button to clear the error code. Press the HOME+OK buttons. Check if the error code still appears when the mower is returning to the charging station. If not, it illustrates that the problem is solved.
If this error keeps displaying after following the troubleshooting guide above, especially, in the condition that the error code triggers without hitting any obstacles, please get in touch with us for further diagnosis or contact your dealer for after-sales service.
Possible cause
During the map testing/mowing/homing process, your mower hits an obstacle but fails to move back to avoid it as your mower gets stuck by obstacles behind or rough terrains. As a result, the bumper sensor is constantly triggered.
Troubleshooting guide
1. Remove the obstacle(s) in your mower's way. If the obstacle (s) can't be removed, please set up an off-limit island on this place.
2. Press the STOP button to clear the error code. Press the HOME+OK buttons. Check if the error code still appears when the mower is returning to the charging station. If not, it illustrates that the problem is solved.
If this error keeps displaying after following the troubleshooting guide above, especially, in the condition that the error code triggers without hitting any obstacles, please get in touch with us for further diagnosis or contact your dealer for after-sales service.
Comments
0 comments
Article is closed for comments.