Powering On:
You can power on the Navimow i in two ways:
1.Connect the Navimow i to the charging station while it is plugged into an active power outlet. The mower will power on automatically.
2.If the Navimow i is not connected to the charging station and has sufficient battery, short press the OK button to power it on.
Powering Off:
1.Disconnect the Navimow i from the charging station.
2.Press and hold the OK button for 4 seconds to turn it off.
Note: If the anti-theft feature is activated, you must enter the PIN code before the mower powers off.
You can power on the Navimow i in two ways:
1.Connect the Navimow i to the charging station while it is plugged into an active power outlet. The mower will power on automatically.
2.If the Navimow i is not connected to the charging station and has sufficient battery, short press the OK button to power it on.
Powering Off:
1.Disconnect the Navimow i from the charging station.
2.Press and hold the OK button for 4 seconds to turn it off.
Note: If the anti-theft feature is activated, you must enter the PIN code before the mower powers off.
Comments
0 comments
Article is closed for comments.