Remove the lid on the left side of the Navimow X3 and hang it on the charging station.
Remove the screw of the Navimow Trimmer and push it into the extension bay slot.
Fasten the screw to keep the Navimow Trimmer module in place.
Access the Navimow App trimming mode, verify if the Navimow Trimmer displays a green light.
Remove the screw of the Navimow Trimmer and push it into the extension bay slot.
Fasten the screw to keep the Navimow Trimmer module in place.
Access the Navimow App trimming mode, verify if the Navimow Trimmer displays a green light.
Comments
0 comments
Article is closed for comments.