Currently, the Navimow X4 uses its camera system for edge cutting, allowing it to detect and follow physical boundaries in real-time. This system adapts to real-world conditions and dynamically adjusts to boundaries. However, performance can be influenced by environmental factors, which may lead to occasional deviations from the boundary.
To enable Edge Mowing, navigate to App Settings > MOWER > Map Management > Edit > Edge Mowing. Once enabled, the mower will automatically mow along the edges 3 times at the beginning of every mowing task, including the edges of Off-Limit Islands.
Suggestions for Improvement:
To ensure the performance of Edge Mowing, remove obstacles from the boundary.
If the Navimow X4 frequently deviates from the boundary, please contact us at support-navimow@rlm.segway.com(for EU users) and navimowsupport-us@rlm.segway.com (for US users) for assistance.
To enable Edge Mowing, navigate to App Settings > MOWER > Map Management > Edit > Edge Mowing. Once enabled, the mower will automatically mow along the edges 3 times at the beginning of every mowing task, including the edges of Off-Limit Islands.
Suggestions for Improvement:
To ensure the performance of Edge Mowing, remove obstacles from the boundary.
If the Navimow X4 frequently deviates from the boundary, please contact us at support-navimow@rlm.segway.com(for EU users) and navimowsupport-us@rlm.segway.com (for US users) for assistance.
Comments
0 comments
Article is closed for comments.