(Navimow i2 AWD) What should I do if the some of the area missed out?

If some areas within the mowing zone are being missed by your Navimow i2 AWD, follow these steps:

1. Inspect the Missed Area

● Check if the missed area is near non-grass surfaces, narrow passages, or obstacles. These can prevent the mower from reaching the area.

2. Non-Grass Areas

● Set a VisionFence-Off zone for non-grass areas so the mower avoids them.

3. Narrow Passages

● Not adjacent to walls/obstacles: Split the area into two separate zones or create a blind zone to help the mower navigate.

● Adjacent to walls: Adjust the area shape, widen the passage, or create a separate zone.

4. Obstacles in the Passage

● Remove obstructions or enable the channel sense feature to allow smoother navigation.

5. Check GPS Signal

● If the area is between buildings, near walls, or other obstructions, the GPS signal may be blocked, affecting coverage.

6. If the Issue Persists

Provide the following information to [e-mail](for EU users) and [e-mail] (for US users) for further assistance:

● Time when the problem occurred

● Photos of the missed area and surroundings

● Serial Number (SN) of your Navimow i2 AWD

● Ensure the Navimow i2 AWD is connected to the mains and placed on the charging station