(Navimow X3)How to power on/off Navimow X3?

Powering On:
You can power on the Navimow X3 in two ways:

Connect the Navimow X3 to the charging station while it is plugged into an active power outlet. The mower will power on automatically.

If the Navimow X3 is not connected to the charging station and has sufficient battery, press and hold the OK button for 1 second to power it on.

Powering Off:
Disconnect the Navimow X3 from the charging station.

Press and hold the OK button for 4 seconds to turn it off.

Note: If the anti-theft feature is activated, you must enter the PIN code before the mower powers off.